AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Resistor Variable Wire Wound Non NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Bourns Instruments Inc part number 3250P67-502, a component that can also be found by inputting NSN 5905-00-824-8003 in our search engine. Alongside part number 3250P67-502, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 80294 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Bourns Instruments Inc part number 3250P67-502 by the FSC designation 5905 Resistors with ease. That being said, we encourage you to complete the RFQ form below for NSN 5905008248003 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-824-8003 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008248003 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 301-102-5KH | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJT | TERMINAL LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SR-1 | MANUFACTURERS CODE | 94580 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| ABHP | III OVERALL LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 930940-18 |
| ABWV | SHAFT DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABKW | III OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| FEAT | SPECIAL FEATURES | O-RING SEAL AROUND SHAFT REQUIRED. DEVICE MAY BE SILICONE FILLED |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| ABMK | III OVERALL WIDTH | 0.445 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.058 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
