AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Resistor Variable Nonwire Wound NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Clarostat Sensors And Controls part number JJCW97931, a component that can also be found by inputting NSN 5905-01-120-9041 in our search engine. Alongside part number JJCW97931, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 12697 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Clarostat Sensors And Controls part number JJCW97931 by the FSC designation 5905 Resistors with ease. That being said, we encourage you to complete the RFQ form below for NSN 5905011209041 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-120-9041 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011209041 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JJCW97931 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.359 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFP | NONTURN DEVICE RADIUS | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | BOTH SHAFTS FLATTED |
| TEST | TEST DATA DOCUMENT | 10001-3178149 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
