AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Resistor Variable Nonwire Wound NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Clarostat Sensors And Controls part number CM45002, a component that can also be found by inputting NSN 5905-01-234-3061 in our search engine. Alongside part number CM45002, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 12697 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Clarostat Sensors And Controls part number CM45002 by the FSC designation 5905 Resistors with ease. That being said, we encourage you to complete the RFQ form below for NSN 5905012343061 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-234-3061 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND, | 5905 | 012343061 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM45002 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABNC | FLAT HEIGHT | 0.220 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| ADAV | III OVERALL DIAMETER | 1.094 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 380-10035-503 |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| ABHP | III OVERALL LENGTH | 1.941 INCHES NOMINAL |
| CBME | III CUBIC MEASURE | 1.824 CUBIC INCHES |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
| ABPM | BODY DIAMETER | 1.094 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| ABXF | SHAFT LENGTH | 0.910 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| ZZZK | SPECIFICATION/STANDARD DATA | 82918-380-10035 MANUFACTURERS SOURCE CONTROL |
| TEST | TEST DATA DOCUMENT | 82918-380-10035 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL AND SWITCH |
| AEFK | MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| ABNB | FIRST FLAT LENGTH | 0.438 INCHES MINIMUM |
| AEFM | MAXIMUM STOP TORQUE | 12.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| ABWV | SHAFT DIAMETER | 0.251 INCHES MAXIMUM |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AAPN | SECTION QUANTITY | 1 |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 340.0 MAXIMUM |
| ADAQ | BODY LENGTH | 0.828 INCHES NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND 0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| SR-1 | MANUFACTURERS CODE | 82918 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
