AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Resistor Variable Nonwire Wound NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Clarostat Sensors And Controls part number CM41723, a component that can also be found by inputting NSN 5905-01-270-1697 in our search engine. Alongside part number CM41723, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 12697 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Clarostat Sensors And Controls part number CM41723 by the FSC designation 5905 Resistors with ease. That being said, we encourage you to complete the RFQ form below for NSN 5905012701697 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-270-1697 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012701697 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 388X | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.109 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.350 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.484 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.077 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.500 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,HOLLOWED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 265.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 4.50 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.250 INCHES NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | 0.0 TO 5.5-55 DEG CELSIUS SINGLE SECTION AND 0.0 TO 4.0-40 DEG CELSIUS SINGLE SECTION AND 0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND-2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND-3.0 TO 3.0 105 DEG CELSIUS SINGLE SECTION AND-4.0 TO |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 12 OCLOCK |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| FEAT | SPECIAL FEATURES | HOLE THROUGH SHAFT CONTINUES TO BACK OF CASE,MUST BE ABLE TO ACCEPT A 0.077 MAXIUM DIAMETER SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
