AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Standoff Threaded Snap In NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Drs Power And Control Technologies part number 18-3137, a component that can also be found by inputting NSN 5340-01-448-3222 in our search engine. Alongside part number 18-3137, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 27192 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Drs Power And Control Technologies part number 18-3137 by the FSC designation 5340 Hardware Commercial with ease. That being said, we encourage you to complete the RFQ form below for NSN 5340014483222 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-448-3222 Item PartTypeName: STANDOFF,THREADED,SNAP-IN | 5340 | 014483222 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-3137 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 2B RIGHT INTERNAL |
| AAJF | Thread Direction | RIGHT-HAND RIGHT INTERNAL |
| AAJF | Thread Direction | LEFT-HAND LEFT EXTERNAL |
| CXYF | Left Projection Chamfer Angle | 45.0 DEGREES NOMINAL |
| CQJX | Nominal Thread Size | 0.190 INCHES LEFT EXTERNAL |
| AATB | Width Between Flats | 0.375 INCHES NOMINAL |
| CRTL | Criticality Code Justification | ZZZY |
| ABRY | Length | 4.000 INCHES NOMINAL |
| CXXX | Right Projection Length | 0.374 INCHES NOMINAL |
| SFTT | Surface Treatment | PASSIVATE STANDOFF |
| TEST | Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | Thread Series Designator | UNC RIGHT INTERNAL |
| AAJD | Thread Class | 2A LEFT EXTERNAL |
| THSD | Thread Series Designator | UNF LEFT EXTERNAL |
| CQJX | Nominal Thread Size | 0.138 INCHES RIGHT INTERNAL |
| SPCL | Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| CMLP | Thread Quantity Per Inch | 32 RIGHT INTERNAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CMLP | Thread Quantity Per Inch | 32 LEFT EXTERNAL |
| STDC | Surface Treatment Document And Classification | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF |
| AASA | Thread Length | 0.265 INCHES NOMINAL LEFT EXTERNAL |
| CXYD | Right End Chamfer Angle | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP 303 STANDOFF |
| MDCL | Material Document And Classification | STM A581 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF |
| CXXW | Right Projection Diameter | 0.190 INCHES NOMINAL |
| STYL | Style Designator | LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
| ZZZW | Departure From Cited Document | AS MODIFIED BY MATERIAL AND LOCKING FEATURE( AS APPLICABLE ) |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
