AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Hose Assembly Nonmetallic NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for General Dynamics Land Systems Inc part number LSCP270032-1, a component that can also be found by inputting NSN 4720-01-460-6484 in our search engine. Alongside part number LSCP270032-1, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 01417 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find General Dynamics Land Systems Inc part number LSCP270032-1 by the FSC designation 4720 Hose and Tubing Flexible with ease. That being said, we encourage you to complete the RFQ form below for NSN 4720014606484 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-460-6484 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014606484 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LSCP270032-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 40.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 40.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
