AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for choosing to fulfill your operational requirements for the Hose Assembly Nonmetallic NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for General Dynamics Land Systems Inc part number LSCP270032-41, a component that can also be found by inputting NSN 4720-01-460-6516 in our search engine. Alongside part number LSCP270032-41, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).
Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 01417 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find General Dynamics Land Systems Inc part number LSCP270032-41 by the FSC designation 4720 Hose and Tubing Flexible with ease. That being said, we encourage you to complete the RFQ form below for NSN 4720014606516 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-460-6516 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014606516 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LSCP270032-41 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | Flange Thickness | 0.295 INCHES NOMINAL 1ST END |
| AFQN | Flange Length | 3.190 INCHES NOMINAL 1ST END |
| AGFF | Flange Width | 2.750 INCHES NOMINAL 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| ABKV | Outside Diameter | 1.542 INCHES NOMINAL |
| ACKH | Minimum Inside Bending Radius | 12.000 INCHES |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| AAJD | Thread Class | 1A 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| AWLS | Connection Type | THREADED EXTERNAL TUBE 2ND END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM | Maximum Operating Pressure | 4000.0 POUNDS PER SQUARE INCH |
| AECS | Bolt Hole Quantity | 4 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AKUT | End Flange Construction | SPLIT 1ST END |
| THSD | Thread Series Designator | UN 2ND END |
| CRDW | Hydrostatic Test Pressure | 8000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 34.380 INCHES NOMINAL WORKING |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXM | Fitting Component And Surface Treatment | COMPLETE FITTING CADMIUM 1ST END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| ADUY | Center To Center Distance Between Bolt Holes Along Width | 1.093 INCHES NOMINAL 1ST END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| ADUZ | Center To Center Distance Between Bolt Holes Along Length | 2.312 INCHES NOMINAL 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| CQBD | Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH |
| CTCJ | Flange Style | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| CQJX | Nominal Thread Size | 1.312 INCHES 2ND END |
| AARX | Inside Diameter | 1.000 INCHES NOMINAL |
| MEDA | Media For Which Designed | HYDRAULIC FLUID SINGLE RESPONSE |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT |
| FEAT | Special Features | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AGAV | End Item Identification | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE |
| AHNX | Bolt Hole Diameter | 0.469 INCHES NOMINAL 1ST END |
| CMLP | Thread Quantity Per Inch | 12 2ND END |
| AHNC | Connection Style | SWIVEL, PLAIN 2ND END |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 90 |
| CQCS | Layer Composition And Location | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
