Part Number PBF1357A4-D21 with NSN 5305-01-323-4155 by Sps Technologies Inc Is Ready for Purchase!

Part Number: PBF1357A4-D21

Alternate P/N: PBF1357A4D21

Manufacturer: Sps Technologies Inc

NSN: 5305-01-323-4155

NIIN: 013234155

Item Name : Screw Close Tolerance

CAGE Code: 27624

FSC: 5305 Screws

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for choosing to fulfill your operational requirements for the Screw Close Tolerance NSN parts you require with Buy Ground Support Equipment. On this page, you can submit a quote request for Sps Technologies Inc part number PBF1357A4-D21, a component that can also be found by inputting NSN 5305-01-323-4155 in our search engine. Alongside part number PBF1357A4-D21, we also have a wide range of other related items available, all of which can be traced back to a wealth of trusted manufacturers on our Approved Vendor List (AVL).

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Buy Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 27624 to uniquely identify items and their manufacturers in a standardized manner. We also utilize Federal Supply Classes (FSCs) to organize our inventory, ensuring customers can find Sps Technologies Inc part number PBF1357A4-D21 by the FSC designation 5305 Screws with ease. That being said, we encourage you to complete the RFQ form below for NSN 5305013234155 or any others that you are interested in, and we will provide you with a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!

NSN Information for Part Number PBF1357A4-D21 with NSN 5305-01-323-4155, 5305013234155

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-323-4155 Item Description: Screw Close Tolerance	5305	013234155	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
Pbf1357a4-D21		2	5

Characteristics Data of NSN 5305-01-323-4155, 5305013234155

MRC	Criteria	Characteristic
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND

Related NSN Components of PBF1357A4-D21

PBF1265-4D17 Bolt Close Tolerance
5306014622885 (5306-01-462-2885)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

PBF1366-5D74 Bolt Shoulder
5306011422896 (5306-01-142-2896)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

PBF1042A5U021 Bolt Close Tolerance
5306013310479 (5306-01-331-0479)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

PBF1266-10-20 Bolt Close Tolerance
5306011442218 (5306-01-144-2218)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

PBF1484-4-14 Screw Close Tolerance
5305013495594 (5305-01-349-5594)
Sps Technologies Inc, CAGE Code 27624
5305 Screws

PBF1267-7H27 Bolt Shear
5306011985525 (5306-01-198-5525)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

PBF1355V3-11D Screw Machine
5305011904565 (5305-01-190-4565)
Sps Technologies Inc, CAGE Code 27624
5305 Screws

PBF1166B4-8 Screw,Close Tolerance
5305016820650 (5305-01-682-0650)
Huck International Inc, CAGE Code 17446
5305 Screws

PBF1535-5-36 Bolt Shear
5306014378719 (5306-01-437-8719)
Sps Technologies Inc, CAGE Code 27624
5306 Bolts

74LS40

RFQ

ITP-001

RFQ

A Complete NSN Part Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification